![lightkey with dmxking ledmx4 lightkey with dmxking ledmx4](https://cdn.shopify.com/s/files/1/0072/5227/9366/products/eDMX4_PRO-5_1200x669.png)
- LIGHTKEY WITH DMXKING LEDMX4 MANUALS
- LIGHTKEY WITH DMXKING LEDMX4 PATCH
- LIGHTKEY WITH DMXKING LEDMX4 FULL
When the problem stops, replace the last cable that you unplugged – but don’t mark it as bad yet! The next thing to do is to re-connect all the cables and see if the problem stays away. If it doesn’t, re-verify the mode and address settings, then skip to the next section of this article!Īfter that, begin unplugging fixtures from DMX, beginning with the last fixture in the chain. Plug in only that fixture to the DMX and see if it works. If it’s just 1 fixture, unplug it from DMX and try a straight “home-run” directly from the console. Is the problem with just 1 fixture, or many? Then, do a quick walk through the problem area of your lighting rig and make sure nothing got unplugged or loose. It also gives me a quick chance to check that the lights are in the correct addresses and placed in the proper places.Īs I mentioned above, the DMX indicator lights on fixtures aren’t always 100% accurate, and that is why I run a chase across the fixtures – to make sure they are actively responding to data. This gives me enough light to see what’s happening, but not too much that I’m blinded. I like to run a static color with a chase in a different color across all of my fixtures, and I usually run it at about 25% intensity. This will show me immediately which lights are responding and which ones aren’t.Ĭhoose a chase or FX that is fast enough that you can track it and see when things become problematic, but slow enough that it doesn’t drive you nuts! The first thing I like to do is to give my fixtures some active DMX, so I can see when things stop working. Once you’ve verified that, there are a few more tricks you can use to troubleshoot this DMX problem.
LIGHTKEY WITH DMXKING LEDMX4 FULL
If you are using microphone cables to connect your lights instead of DMX cables, this is likely the source of your problems! While microphone cables can work, they are not recommended, and over time WILL give you problems – click here to read my full article on using microphone cables for DMX lighting! If you’ve had your rig setup for a while and not changed anything, then you can skip this step and move forward to check your cables and connections… Step 2: Check Your Cables Some modes can be very similar and cause you to believe that the fixture was working and then started “acting up”, but the truth is, it was never fully right!
LIGHTKEY WITH DMXKING LEDMX4 MANUALS
Then, whip out the manuals for your fixtures to be sure the modes are set right – if I fixture is supposed to be in 4 channel mode, but it’s actually in 7 channel mode, then you’re going to have problems!Ī wrong mode setting can be particularly difficult to diagnose from afar because the light may be working “mostly” right. Make sure that everything matches up the way that it is supposed to, and that it’s all plugged into the proper universes. If your console has an “output” screen that you can view, pop that up and check it as well.
LIGHTKEY WITH DMXKING LEDMX4 PATCH
The first step in finding a DMX problem is to check your console’s patch and the fixture’s modes/addresses.Īlso, ensure that the console’s Grand Master and any other masters are where they should be. This is where things get tricky… Fixing Your DMX Problems Step 1: Check Your Console and Fixture Settings While it’s a sign that there is some sort of DMX-like signal present, it can be on when there is not good data or can be off when there is good data! To make things worse, the “DMX” indicator light on the back of many lights isn’t really helpful either.
![lightkey with dmxking ledmx4 lightkey with dmxking ledmx4](https://gonginternational.jp/wp-content/uploads/DSC_0320-1024x576.jpg)
Most often, DMX problems are exhibited by: However, with a few tricks, it can be simple to diagnose and fix your DMX issues pretty quickly. On the surface, DMX problems can see very mystical and difficult to understand or troubleshoot. If you’ve never encountered a DMX problem before, be prepared to be a little confused. The uncertainty of where the problem is, coupled with a little confusion can make things really tough.
![lightkey with dmxking ledmx4 lightkey with dmxking ledmx4](https://www.cxnetwork.com.au/wp-content/uploads/2019/01/Build2-768x432.jpg)
One of the most crushing feelings you can encounter when working with lighting comes when things don’t work right!